Pontiac 11-bolt Timing Cover Divider Plate Transfer Tubes

Tubes/Seals for use with water pump divider plate WDP74. Sold as a Pair. Fits all Pontiac V-8 '69--'81 timing covers.

DPB75 Pontiac Timing Cover Divider Plate Transfer Tubes.............. $24.99

Pontiac 11-Bolt Water Pump Divider Plate

Replace your rusted plate with this new reproduction. Be sure to set plate clearance to impeller to 1/16 of an inch for best efficiency. Fits all Pontiac V-8 '69--'81 timing covers. Avaible in natural or stainless steel.

Excellent sand cast reproduction timing cover. Cover differs slightly in cosmetic appearance from factory GM cover. Front Seal installed. Requires use of WDP73 plates or equivalent. Does not use TAS119 sleeves. Replaces ’63½ - ‘68 8-bolt timing covers.

PTC125 Pontiac 8-Bolt Timing Cover ..................................................$259.99

Stainless steel reproduction plates replace rotted plates to ensure proper cooling. Fits ’63½ - ‘68 8-bolt timing cover or PTC125.

WDP73 Pontiac 8-Bolt Water Pump Divider Plate (pr)..........................$52.99

add item to shopping cart and stay on this page 

Pontiac Timing Cover to Intake Bolt & Clamp

This unit secures the timing cover to the intake manifold sealing the coolant bypass. Fits all Pontiac Timing Covers 63½ - ‘81

TBC118 Pontiac Timing Cover Intake Bolt Clamp.................................$12.99

Pontiac Timing Cover Alignment Sleeves

These sleeves locate the timing cover to the block on the lower counterbored timing cover bolt holes to center the crankseal for proper sealing. Fits '55 to 81 Pontiac V-8. Not used on the PTC125.

TAS119 Pontiac Timing Cover Alignment Sleeves (pr)........................$7.99

Pontiac Cam Thrust Plate and Hardware

Replace your worn cam thrust plate with this hardened steel replacement version. Complete with grade 8 hardware. Fits '55 to 81 Pontiac V-8.

CTP123 Pontiac Cam Thrust Plate and Hardware.................................$19.99

Pontiac Hi-Load Nickel-Aluma-Bronze Thrust Plate

For both performance and stock applications this thrust plate replaces the stock steel thrust plate and reduces wear while carring a much higher load. This is critcal, especially in roller cam applications. Precision machining ensures proper cam end-play. Includes hardware.

CTP223 Pontiac Hi-Load Nick -Aluma_Bronze Thrust Plate.................$49.99

Replace your worn fuel pump eccentric with this hardened steel replacement version. Fits '55 to 81 Pontiac V-8.

FPC122 Pontiac Fuel Pump Eccentric...................................................$39.99

This piece eliminates the fuel pump eccentric when an electric fuel pump is used to replace the mechanical fuel pump. CBW127 bolt and washer are required. Fits '55 to 81 Pontiac V-8.

FEE222 Pontiac Fuel Pump Eccentric Eliminator.................................$16.99

Pontiac Cam Bolt and Washer

Replacement grade 8 bolt and washer to hold the fuel pump eccentric and timing gear to camshaft. Fits '55 to 81 Pontiac V-8.

CBW127 Pontiac Cam Bolt and Washer...................................................$8.99

Pontiac Cam Key

Replacement Pontiac camshaft key. Fits '55 to 81 Pontiac V-8.

CAK129 Pontiac Cam Key..........................................................................$1.99

Pontiac High Volume Mechanical Fuel Pump

Hi-volume fuel pump features 4 threaded inputs and outputs to accomodate all of your fuel and vapor lnes. Finish is Chrome. 140 gph @ 6psi Max pressure 8 psi Inlet attachment - female threads Inlet size - 1/4 NPT Fits '55 to 81 Pontiac V-8. See fittings below.

PFP134 Pontiac Hi-Volume Fuel Pump...................................................$49.99

Fuel Pump Plug 1/4-inch NPT Brass Hex

Perfect for the PFP134 fuel pump or any other application requiring a Brass 1/4-inch NPT Plug.

FPF131 Fuel Pump Plug 1/4-inch NPT Brass...........................................$4.99

Fuel Pump Fitting 1/4-inch NPT to 3/8-inch Barb Brass

Perfect for the PFP134 fuel pump or any other application requiring a Brass 1/4-inch NPT Male to 3/8-inch Barb fitting.

FPF132 Fuel Pump Fitting 1/4-inch NPT to 3/8-inch Barb Brass ..........$6.99

Fuel Pump Plug 1/4-inch NPT Black Annodized Alum

Perfect for the PFP134 fuel pump or any other application requiring a Alum 1/4-inch NPT Plug.

FPF137 Fuel Pump Plug 1/4-inch NPT Alum............................................$3.99

Fuel Pump Fitting 1/4-inch NPT to 3/8-inch Barb Alum

Perfect for the PFP134 fuel pump or any other application requiring a 1/4-inch NPT Male to 3/8-inch Barb fitting. Black Annodized

FPF138 Fuel Pump Fitting 1/4-inch NPT to 3/8-inch Barb Alum............$7.99

Pontiac Billet Aluminum Fuel Pump Block-Off Plate

Polished billet aluminum fuel pump block-off plate ball milled. Fits '55 to 81 Pontiac V-8 and many other GM with 1.75 bolt center.

FPB135 Pontiac Fuel Pump Block-Off Plate..........................................$14.99